Product Center
Professional floor paint manufacturers
Y Series Surface Coating
Key Word:
Category:
Description
Product Description:Two-component high solid content flat coating composed of epoxy resin and curing agent
Product use:Applicable to light industrial workshops, office buildings, warehouses, underground parking garages, food processing plants, etc.
Performance characteristics:1,Seamless dust, easy to clean, mildew and other excellent performance;
2. High hardness, excellent wear resistance, scratch resistance, toughness,
3, oil resistance, acid and alkali resistance, water resistance is good.
4, good leveling, gloss reached more than 85 degrees
Construction method: Roll-on
Dosage of recommend:The dosage of each channel is 0.15 ㎏/㎡-0.2 ㎏/㎡. (Precautions: 1. If the dosage is less than 0.15KG/㎡, there will be serious orange peel and poor hiding power. 2. If the dosage is higher than 0.2KG/㎡, the curing will slow down, the hardness will rise slowly, and the appearance will be wavy orange. 3, the color of poor hiding power needs to increase the dosage, do more to cover or use special technology, special color and technology please communicate with the technical department before deciding to place an order)
Storage:Effective storage period of one year, after expiration can be inspected according to quality standards, such as the requirements can be applied.
Technical indicators:
| Project |
Reference Index |
Test standard and description |
| Proportioning |
A：B=4：1 |
|
| Table dry (h) |
4.5 |
25℃ |
| Time available (min) |
40 |
|
| Practical work (d) |
5 to 7 |
|
| Time available (h) |
24～36 |
|
| Construction viscosity |
328mpa.s |
|
| Adhesion (grade) |
≤1 |
GB/T22374-2008 |
| Pencil hardness |
≥2H |
GB/T22374-2008 |
| Abrasion resistance (750g/500r,g) |
≤ 0.030 |
GB/T22374-2008 |
| Oil resistance (72h) |
No blistering, no peeling, slight discoloration allowed |
GB/T22374-2008 |
| Alkali resistance (20% NaOH,72h) | ||
| Acid resistance (10% H2SO4,48h) | ||
| Water resistance |
Qualified |
GB/T22374-2008 |
Product use instructions
lThe construction shall be carried out under the conditions of ambient temperature ≥ 5 ℃ and relative humidity ≤ 85%, and the coating shall be applied on a clean, dry and pore-free intermediate coating. If the construction period is urgent, please test in a small area to confirm that there is no color difference problem before construction in a large area under high humidity conditions.
lThe product has been proved by experiments to have sufficient construction adaptability, should not add any solvent and diluent, if you want to add please consult our technical department.
lBefore construction, the component shall be fully mixed evenly, and then mixed with the B component according to the proportion, and the construction can be carried out according to the ambient temperature for 2 to 3 minutes;
lDuring construction, the material quantity per unit area shall be calculated according to the design thickness and material density;
lWhen the temperature is high, attention should be paid to the fast reaction gel and the use time can be shortened. Please determine the amount of ingredients for each time according to the actual temperature and construction progress. The prepared materials must be used up at one time, and the remaining A and B components must be sealed and preserved;
lThis product is flammable articles, storage, transportation, construction must be away from the fire and maintain good ventilation; construction should wear gloves, goggles, to avoid the product contaminated skin, if contaminated skin can be washed with detergent and then soap, warm water; if accidentally splashed into the eyes, should be immediately washed with water or diluted boric acid and sent to the hospital for treatment;
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Guangzhou Zeal Chemical Co., LTD
Address: 4F, Corey Building, 336 Qingxin Road, Guangzhou Economic and Technological Development Zone
Telephone：+86 020-8205 7070
Mailbox：info@gzzeal.com
Pt.Fika Makmur Indonesia
JALAN PETA BARAT JL. Peta Barat No.23,Jurumudi, Kec. Benda, Kota Tangerang, Banten 15124
Telp:+62 21 3826 9138