Epoxy millstone floor how construction?
Floor paint factory: epoxy grinding stone floor with high compressive strength, strong wear resistance, colorful colors and patterns can be combined in any way, especially suitable for corridors, hotels, villas, Expo halls, large shopping malls, senior entertainment venues, business clubs, exhibition halls and other places that need beautiful and wear-resistant floors.
Release Time:
2020-02-27 12:00
Floor paint factory: epoxy grinding stone floor with high compressive strength, strong wear resistance, colorful colors and patterns can be combined in any way, especially suitable for corridors, hotels, villas, Expo halls, large shopping malls, senior entertainment venues, business clubs, exhibition halls and other places that need beautiful and wear-resistant floors.
High decorative epoxy grinding stone floor mainly through the following steps:
One. After polishing, dust removal, consolidation and other pretreatment on the ground, the solvent-free epoxy varnish or water-based epoxy varnish is used for scraping and priming, and the coating dosage is 0.1~0.3kg/m2.
II. After the primer is air-dried, use solvent-free low-viscosity epoxy resin mixed with quartz sand (or) quartz powder to make mortar paint scraping.
Three. Making the pattern layer: for the pattern with a large area, the mold can be bonded on the mortar layer with epoxy glue or other high-strength adhesive according to the pre-designed pattern, and then poured into the mold to spread the solvent-free epoxy grinding stone floor slurry and then vibrated and smoothed. The corners are manually operated, and the paving thickness is 0.2~0.3mm higher than the design thickness of the pattern layer;
For small patterns with small areas, a mold is made in advance of materials that are easy to pinch and deform and easy to demould according to the design pattern pattern, and then solvent-free epoxy grinding stone slurry is poured into the mold, manually leveled, cured and demoulded, and then bonded to the mortar layer with strong epoxy glue or other high-strength adhesives.
Four. On the outside of the pattern layer, the color of the overall pouring and paving slurry and (or) the grinding stone aggregate are obviously different from the solvent-free epoxy grinding stone floor slurry of the pattern layer until it is 0.2-0.3mm higher than the height of the pattern layer, and the vibration is leveled, and the corners are manually operated. The pattern layer and the cast slurry outside the pattern together constitute the grindstone layer.
Five. After curing for 24h, polish it for at least 2 times with a grinder, and then polish it for at least 1 time with fine sandpaper to make the surface flat and free of protrusions. In the construction of 5-15 DEG C, the use of winter curing agent or curing accelerator.
VI. After vacuuming, the solvent-free epoxy resin transparent coating shall be scraped at least 2 times to fill the pores left in the grindstone layer and increase the compactness of the coating. Each construction interval is 6-10h, winter curing agent or curing accelerator is used during construction at 5-15 ℃, and the total amount of coating in this step is 0.4-0.6kg/㎡.
Seven. Clear paint at least 3 days after curing, at least one full water-based liquid floor wax for maintenance.
Floor paint factory: epoxy grinding stone floor curing method.
①. After the completion of the floor construction needs to be cured 7-10 days before it can be used, during the curing period, to prevent water or other solution infiltration surface.
②. Employees entering the workshop must be replaced with rubber-soled shoes (black-soled shoes with foam soles are not allowed) (so as not to scratch the ground by bringing mud and sand from outside into the workshop).
③. All hardware: such as iron tables, iron chairs, iron shelves, etc., must be wrapped in soft plastic, rubber or paper pads to avoid scratching the ground during use.
④. The tractor should fully lift the plate off the ground, and pay special attention to the angle of the plate when turning, and remember not to scratch the ground.
⑤. When cleaning the ground, you need to use a soft mop with good water absorption or a wet and dry vacuum cleaner, which can be cleaned with water or detergent, but please pay attention to the slippery ground.
⑥. If it is worn or scratched due to the use of a long time, a small area can be repaired locally, and if the area is larger, it is recommended to roll it again.
⑦. Before the equipment enters the factory, it is necessary to lay a hard carton bottom on the floor to avoid scratching the ground during transportation of the equipment.
⑧. Please use hard or elastic rubber wheels for the wheels of scooters and carts, and use them separately inside and outside the factory.
⑨. Can be waxed according to the requirements of the ground (the effect can avoid the ground scratch).
Related News
Anti-static sand self-leveling is a new type of floor coating, it has both floating sand smooth and beautiful, anti-pressure wear-resistant, light corrosion and other advantages, but also has anti-static function. It is suitable for places with high decoration, high cleanliness and antistatic requirements, such as electronics, precision instruments, chemistry, medicine, aerospace, etc., especially the production workshop and storage area of electronic instruments, integrated circuits and other components with high sensitivity to static electricity.
A brief description of the advantages and application of waterborne epoxy resin
With the introduction of environmental regulations and the awakening of environmental awareness, floor paint is a solvent-based paint with serious pollution, and VOC emissions are limited by domestic and foreign regulations. In order to meet the needs of environment-friendly and healthy life, the environmental road of the seven industries has been imperative. The "spring breeze" of the floor paint industry reform has also blown into the floor paint field, and the popularity of environmental protection products such as floor water paint has become the mainstream development direction of the industry.
Application Scenarios Overview of Waterborne Epoxy Resin
Waterborne epoxy resin refers to the epoxy resin in the form of dust, droplets, colloid dispersed in water stable dispersion system. The study of waterborne epoxy resin has been carried out abroad since the 1950 s, in which the epoxy resin is made into emulsion is a common research approach. Waterborne epoxy resins and curing agents are widely used as coatings.
Construction method for parking lot floor paint
The utility model relates to an epoxy floor, especially a parking lot floor paint construction. Epoxy floor is a kind of high strength, wear-resistant, beautiful floor, has the advantages of seamless, solid texture, good chemical resistance, anti-corrosion and dustproof, convenient maintenance, low maintenance cost and so on. Epoxy floor is widely used, parking lot floor often use epoxy floor.
Construction method and process of anti-skid parking lot floor paint
The invention relates to the technical field of construction, in particular to a construction method for anti-skid parking lot floor paint. In order to improve travel safety, some parking lots, toilets, steps, and ramps are equipped with non-slip floors to increase the friction between the soles or tires and the ground to prevent pedestrians from slipping or vehicles from slipping. However, the existing non-slip floor is expensive, and the comfort of pedestrians or vehicles is poor. Especially in rainy and foggy weather or water conditions, the anti-skid effect is poor. In addition, in the use environment of the garage, due to the weight and frequency of use of the car, cracks or peeling will appear on the surface of the floor paint, which destroys the overall beauty of the ground, and the later maintenance cost is high and there is safety.
Construction technology of parking lot floor paint
With the rapid development of real estate, more and more real estate enterprises began to attach importance to the planning and construction of underground garage, underground garage is no longer the original cement concrete. Because the construction of the underground garage is related to the image of the real estate enterprise, they all attach great importance to the beautiful and practical construction of the garage ground. For the parking lot floor paint is currently popular construction technology. The construction technology of floor paint for underground parking lot is introduced. The construction steps of the parking lot epoxy floor paint include basic treatment in the coating surface coating curing. So, epoxy floor paint primer, paint, paint how to construction? The following is the parking lot floor paint construction process in the specific steps and
Guangzhou Zeal Chemical Co., LTD
Address: 4F, Corey Building, 336 Qingxin Road, Guangzhou Economic and Technological Development Zone
Telephone：+86 020-8205 7070
Mailbox：info@gzzeal.com
Pt.Fika Makmur Indonesia
JALAN PETA BARAT JL. Peta Barat No.23,Jurumudi, Kec. Benda, Kota Tangerang, Banten 15124
Telp:+62 21 3826 9138