Product Center

Professional floor paint manufacturers

Waterborne Epoxy Surface Coating

Water-based environmental protection products, odorless, non-toxic. Shiny dumb.

Key Word:

Consultation:

Inquiry

Description

Product Description

Two-component waterborne epoxy finish coating composed of epoxy resin and waterborne epoxy curing agent

Product use

Applicable to light industrial workshops, office buildings, warehouses, underground parking garages, etc., water-based environmental protection products.

Performance characteristics Water-based environmental protection products, odorless, non-toxic. Shiny dumb.

Construction method: Roll-on

Dosage:0.18-0.25kg/㎡

Storage:Valid storage period of half a year, after expiration can be inspected according to quality standards, such as the requirements can be applied.

Technical indicators:

Project

Indicators

Test standard and description

Proportioning

A:B=5:1

 

recommend amount of added water

5%-10%

 

Table dry time

2.5h

25℃

Done time

3d

25℃

usable time

30min

25℃

Compressive strength

>50

GB/T 22374-2008

Product use instructions

Construction shall be carried out under the conditions of ambient temperature ≥ 5 ℃ and relative humidity ≤ 85%, and the coating shall be applied on a clean, dry and pore-free primer;

Before construction, after the component is fully stirred, the two components must be mixed for 2 minutes to 3 minutes, and then add 5%-10% water, and then stir for about 1 minute before construction. (Note: Must use hand mixer,And in the construction process can not add water will affect the gloss with curing effect)

This product can be used for about 30 minutes at 25 ℃. The use time of winter models is similar. When the temperature is high (above 30 degrees), pay attention to the fast reaction gel and shorten the use time. Please determine the amount of ingredients for each time according to the actual use temperature and construction progress. The prepared materials must be used up at one time, and the remaining components A and B must be sealed and preserved;

This product is flammable articles, storage, transportation, construction must be away from the fire and maintain good ventilation; construction should wear gloves, goggles, to avoid the product contaminated skin, if contaminated skin can be washed with detergent and then soap, warm water; if accidentally splashed into the eyes, should be immediately washed with water or diluted boric acid and sent to the hospital for treatment;

This product is in25The shelf life at ℃ is6For months, please keep it in a cool and dry place and store it at a temperature.10~35C.

Get A Quote

Note: Please leave your email address, our professionals will contact you as soon as possible!