Product Center
Professional floor paint manufacturers
No noise parking lot
Key Word:
Category:
Description
Product Description:Two-component high-solid surface coating composed of epoxy resin and curing agent for noise-free parking lot
Product use:Suitable for noise-free parking lot channel surface coating, good film wrapping
Performance characteristics:1. High solid content and low odor;
2, easy to clean, resistant to pollution;
3, non-slip, no noise, car exercise comfortable;
4, film fullness, good wear resistance and scratch resistance;
Construction method: Medium wool surface coating roller roller coating
UseQuantity:0.2~0.25 ㎏/㎡/road, two roads
Note: According to the choice of different colors and different dosage, especially the color of poor hiding power, you need to do several more covers or use special technology (please consult the company's technical personnel for details).
StorageDepositSex:Effective storage period of half a year, after expiration can be inspected according to quality standards, such as to meet the requirements can be used.
Technical indicators:
| Project |
Reference Indicators |
Test standard and description |
| Table dry (h) |
2.5～3 |
25℃ |
| Available time (min) |
20 to 30 |
|
| Practical work (d) |
2 to 3 |
|
| Adhesion (grade) |
≤1 |
GB/T9286-1998 |
| Pencil hardness |
≥ H |
GB/T6739-1996 |
| Abrasion resistance (750g/500r,g) |
≤ 0.030 |
GB/T1768-2006 |
| Oil resistance (72h) |
No blistering, no peeling, slight discoloration allowed |
GB/T9274-1988 |
| Alkali resistance (20% NaOH,72h) |
||
| Acid resistance (10% H2SO4,48h) |
Product use instructions
lConstruction shall be carried out under the conditions of ambient temperature ≥ 5 ℃ and relative humidity ≤ 85%. The surface temperature of base surface before coating and during curing (before surface drying) shall be higher than dew point by 3 ℃ to prevent water vapor condensation on the surface of substrate and wet film from affecting coating adhesion and surface effect;
lPainting on the special noiseless sand coating surface;
lThe product has been proved by experiments to have sufficient construction adaptability, should not add any solvent and diluent, if you want to add please consult our technical department.
lBefore construction, the component shall be fully stirred evenly, mixed with the B component according to the proportion, and the construction can be carried out by fully stirring for 2~3 minutes depending on the ambient temperature;
lEpoxy resin floor coating in the construction of the completion of the curing period of about 7 days (25 ℃), the first three days of the coating as the main curing period, clear completely closed workplaces, curing period to prohibit water and heavy pressure, so as not to artificially damage the epoxy coating;
lStorage conditions: should be sealed in a cool and dry place, storage temperature 10~35 ℃;
lThis product is flammable articles, storage, transportation, construction must be away from the fire source and maintain good ventilation; in case of fire, use dry powder fire extinguisher or sand cover to extinguish the fire;
lDuring construction, gloves and goggles should be worn to avoid skin contamination of this product. If the skin is contaminated, it can be washed with cleaning agent and then washed with soap and warm water. If it is splashed into the eyes, it should be washed with water or diluted boric acid immediately and sent to hospital for treatment;
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Guangzhou Zeal Chemical Co., LTD
Address: 4F, Corey Building, 336 Qingxin Road, Guangzhou Economic and Technological Development Zone
Telephone：+86 020-8205 7070
Mailbox：info@gzzeal.com
Pt.Fika Makmur Indonesia
JALAN PETA BARAT JL. Peta Barat No.23,Jurumudi, Kec. Benda, Kota Tangerang, Banten 15124
Telp:+62 21 3826 9138