Product Center

Professional floor paint manufacturers

Description

Product description: Two-component sun-resistant PU surface coating composed of acrylic resin and sun-resistant polyurethane curing agent
Product use: suitable for outdoor requirements of the general square floor, stadium, etc.
Performance characteristics: 1, can be used for outdoor, good yellowing resistance, good color retention, chemical resistance, acid and alkali resistance.
2. Low mixing viscosity, easy construction, high cost performance. Glossy matte finish.
Construction method: roller coating
Dosage: ≥ 0.25 ㎏/㎡, two
Note: According to the choice of different colors and different dosage, especially the color of poor hiding power, you need to do several more covers or use special technology (please consult the company's technical personnel for details).
Storage: A material at room temperature and dark storage for one year, after expiration can be inspected according to quality standards, if it meets the requirements can be applied.
B material is stored at room temperature and dark for 2 months, and can be inspected according to quality standards after expiration. If it meets the requirements, it can be applied (it is recommended to use it as soon as possible, because during storage, the curing agent will react with water vapor in the air to affect its effectiveness)
Technical indicators:
Project Reference Indicators Test standard and description
Table dry (min) 5~10 25℃
usable time (h) 2
Practical work (d) 1-2
Re-coating time (h) 20~24
Adhesion (grade) ≤1 GB/T9286-1998
Pencil hardness ≥ H GB/T6739-1996
Abrasion resistance (750g/500r,g) 0.039 GB/T1768-2006
Oil resistance (72h) No blistering, no peeling, slight discoloration allowed GB/T9274-1988
Alkali resistance (40% NaOH,72h)
Acid resistance (40% H2SO4,48h)
Product use instructions
Construction shall be carried out under the conditions of ambient temperature ≥ 5 ℃ and relative humidity ≤ 85%, and the coating shall be applied on the clean, dry and non-porous intermediate coating;
The product has been proved by experiments to have sufficient construction adaptability, should not add any solvent and diluent, if you want to add please consult our technical department.
The product is a solvent-containing product with a large smell. During the coating process, it is necessary to pay attention to good ventilation. When in use, it is necessary to avoid direct contact with the skin and eyes. It is recommended to wear a special goggles protective mask, as well as rubber gloves, work clothes. After the operation is completed, hands and other exposed parts should be cleaned in time.
Before construction, the component is fully stirred evenly, mixed with the B component according to the proportion, depending on the ambient temperature, fully stirred for 1 to 2 minutes, and then mixed with powder (or sand) according to the proportion for 3 minutes, then the construction can be carried out;
When the temperature is high, attention should be paid to the fast reaction gel and the use time can be shortened. Please determine the amount of ingredients for each time according to the actual temperature and construction progress. The prepared materials must be used up at one time, and the remaining A and B components must be sealed and preserved;
This product is flammable articles, storage, transportation, construction must be away from the fire and maintain good ventilation; construction should wear gloves, goggles, to avoid the product contaminated skin, if contaminated skin can be washed with detergent and then soap, warm water; if accidentally splashed into the eyes, should be immediately washed with water or diluted boric acid and sent to the hospital for treatment;

Main functions

     

   1Hardening and wear resistance

       UseZEALTOP(>TABLE>Sealed concrete curing agentTreated concrete strength increased by 40%Improve the wear resistance of the ground. The ground will not be worn, but will achieve the effect of polishing, and the longer the use of the better the sensory effect.

   2Sealing and anti-seepage

       ZEALTOP(>TABLE>Sealed concrete curing agentCan seal concrete, cement masonry and other materials, making it a solid entity to prevent other substances from penetrating.Sealed concrete curing agentThe permeability of the ground makes it possible to carry out deep sealing, thus extending the life of the concrete, while making the ground easy to clean and maintain.

   3Dustproof

       The salt in concrete is a common cause of concrete floor dust,ZEALTOP(>TABLE>Sealed concrete curing agentWith the role of salt in the concrete, constitute a part of the whole concrete, it will be permanently sealed, so as to completely achieve the role of surface dust.

4Reduce tire marks

       Forklift marks are a problem in most warehouses, especially on organic polymer materials, such as polyurethane, epoxy, wax and other surfaces. If the concrete is sealed and hardened as a whole, these marks will be few, and even if they appear, they can be easily removed.

  5, permanent, charming luster

       Regular cleaning, use and the passage of vehicles and other friction, the ground will gradually produce a charming luster. This is the opposite of organic polymer materials such as epoxy, polyurethane, wax and other ground and powder emery ground. After these ground are used, the ground is constantly worn and rough, and will soon lose its luster and part of its function.

   6Maintenance and life

       ByZEALTOP(>TABLE>Sealed concrete curing agentThe treated concrete floor only needs daily cleaning and maintenance, and the service life can be up to 15More than years.

 

 Product Components

ZEALTOP(>TABLE>Concrete seal curing agent has A, B, two components

MG600 three-component products:MG600-AComponents,MG600-BComponents,.Scope of application:

1.Concrete old ground or carborundum old ground, loose ground, chalking, dust and other phenomena;

2.The concrete original slurry plasters new ground and emery new ground;

3. Terrazzo floor.

Get A Quote

Note: Please leave your email address, our professionals will contact you as soon as possible!