Product Center
Professional floor paint manufacturers
Super wear-resistant floor system
Key Word:
Category:
Description
Product Description:Three-component super wear-resistant diamond flat coating composed of epoxy resin, special epoxy curing agent and wear-resistant aggregate
Product use:Suitable for light industry workshops, office buildings, warehouses, underground parking garages, food processing plants and other requirements for super wear-resistant ground use
Performance characteristics:1, with seamless dust, mildew and other excellent performance;
2, high hardness, excellent super wear resistance, scratch resistance, toughness;
3, oil resistant, water resistance, good performance resistance;
4, frosted surface, gloss slightly dumb, gloss at about 20 degrees
Construction method: Use a flat knife to scrape evenly, use about 0.08kg-0.1 ㎏/㎡, and then use the material.wettedThe roller rolls horizontally and vertically. If there are still roller marks, use the roller to take several more times. After the 3 components are mixed, the bottom aggregate shall be stirred up for each use before use. (It is recommended to use a short hair roller with a hair length of 7mm-9mm for construction; The background color of surface coating should be consistent with that of surface coating.)
Dosage of recommend:Each dosage is 0.08kg-0.1 ㎏/㎡.
StorageDepositSex:Effective storage period of one year, after expiration can be inspected according to quality standards, such as the requirements can be applied.
Technical indicators:
| Project |
Reference Indicators |
Test standard and description |
| Proportioning |
A：B：C==5:2:4 |
|
| Table dry (h) |
4.5 |
25℃ |
| Available time (min) |
40 |
|
| Practical work (d) |
5 to 7 |
|
| Time available (h) |
24～36 |
|
| Construction viscosity |
420mpa.s |
|
| Adhesion (grade) |
≤1 |
GB/T22374-2008 |
| Pencil hardness |
6H |
GB/T22374-2008 |
| Hardness best time (H) |
48H |
GB/T22374-2008 |
| Abrasion resistance (750g/500r,g) |
0.009 |
GB/T22374-2008 |
| Oil resistance (72h) |
No blistering, no peeling, slight discoloration allowed |
GB/T22374-2008 |
| Alkali resistance (20% NaOH,72h) |
||
| Acid resistance (10% H2SO4,48h) |
||
| Water resistance |
Qualified |
GB/T22374-2008 |
Product use instructions
lThe construction shall be carried out under the conditions of ambient temperature ≥ 5 ℃ and relative humidity ≤ 85%, and the coating shall be applied on a clean, dry and pore-free intermediate coating. If the construction period is urgent, please test in a small area to confirm that there is no color difference problem before construction in a large area under high humidity conditions.
lThe product has been proved by experiments to have sufficient construction adaptability, should not add any solvent and diluent, if you want to add please consult our technical department.
lBefore construction, the component is fully mixed evenly, and the B component is mixed in proportion. Depending on the ambient temperature, the summer is fully stirred for 2 to 3 minutes, and the winter is fully stirred for 3 to 5 minutes, and the construction can be carried out;
lDuring construction, the material quantity per unit area shall be calculated according to the design thickness and material density;
lWhen the temperature is high, attention should be paid to the fast reaction gel and the use time can be shortened. Please determine the amount of ingredients for each time according to the actual temperature and construction progress. The prepared materials must be used up at one time, and the remaining A and B components must be sealed and preserved;
lThis product is flammable articles, storage, transportation, construction must be away from the fire and maintain good ventilation; construction should wear gloves, goggles, to avoid the product contaminated skin, if contaminated skin can be washed with detergent and then soap, warm water; if accidentally splashed into the eyes, should be immediately washed with water or diluted boric acid and sent to the hospital for treatment;
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Guangzhou Zeal Chemical Co., LTD
Address: 4F, Corey Building, 336 Qingxin Road, Guangzhou Economic and Technological Development Zone
Telephone：+86 020-8205 7070
Mailbox：info@gzzeal.com
Pt.Fika Makmur Indonesia
JALAN PETA BARAT JL. Peta Barat No.23,Jurumudi, Kec. Benda, Kota Tangerang, Banten 15124
Telp:+62 21 3826 9138